Shop
ABS/ESP Bosch ESP 9.0 – EEPROM 95256 (VAG)
In stock
Professional file processing and full bench service for VAG Bosch ESP 9.0 ABS/ESP units, equipped with 95256 EEPROM.
Available operations: DTC C123E:F0 Reset and Cloning between compatible units.
DTC C123E:F0 – Hydraulic brake booster: intervention limit reached
Indicates the intervention limit of the Hydraulic Boost Compensation (HBC) system has been reached, often associated with brake booster vacuum anomalies. The error may remain permanent and cannot be cleared via diagnostics.
DTC Reset is available via EEPROM dump or by sending the unit to the lab, following resolution of the original fault and verification of braking system safety.
Cloning requires full bench service only, with both original and replacement units sent to us.
The ECU shown in the images is not included.
Airbag (RBG) Bosch A9 / K0 – EEPROM 95320 (PSA/Opel)
In stock
Professional file processing and full service for Bosch Airbag / SRS RBG A9/K0 ECUs equipped with 95320 EEPROM memory, installed on Citroën, Peugeot and Opel vehicles.
Crash Reset operations are available to restore data after an accident, along with Cloning between technically compatible ECUs.
Crash Reset can be requested through EEPROM dump processing or by sending the ECU to our lab.
Cloning is only available through full service and requires both the original and replacement ECUs.
The ECU shown in the images is not included.
Airbag Continental – MCU Renesas RH850 R7F7010123/R7F7010183 (Suzuki)
In stock
Professional service for Continental Airbag control units with MCU Renesas RH850 R7F7010123 or R7F7010183, used on Suzuki applications.
Available operations:
- Crash Reset
- VIN Programming
- ECU Cloning
The service can be performed via file processing or, when applicable, via complete module service.
Airbag Continental – MCU ST SPC560P50 (FCA)
In stock
Professional file processing service for Continental Airbag control units equipped with SPC560P50 microcontroller.
PROXI Alignment, Crash Reset and VIN Programming operations are available, selectable individually or in combination.
For PROXI alignment, processing can be performed using the dumps of the original and destination Airbag ECU or the vehicle’s Body Computer dump together with the destination Airbag ECU dump.
Airbag FoMoCo (Autoliv) – Infineon XC2361B-40F / XC2336A-72F MCU (Ford)
In stock
Professional file processing and complete bench service for FoMoCo Airbag / RCM units manufactured by Autoliv and equipped with Infineon XC2361B-40F or XC2336A-72F MCUs, used on numerous Ford applications.
Crash Reset and Cloning operations are available. For Crash Reset, you must provide the Flash1 content for XC2361B-40F MCU or Flash3 for XC2336A-72F MCU.
Cloning requires the physical shipment of the unit.
The ECU shown in the images is not included.
Airbag Siemens VDO – EEPROM 95320 (FCA)
In stock
Professional file processing service for Siemens VDO Airbag ECUs equipped with EEPROM 95320.
PROXI Alignment and Crash Reset operations are available, selectable individually or in combination.
For PROXI alignment, processing can be performed using the dumps from the original and target Airbag ECU or the vehicle’s Body Computer dump together with the target Airbag ECU dump.
Airbag TRW – EEPROM 95128/95640 (Porsche)
In stock
Professional service for TRW Airbag control modules with EEPROM 95128 or 95640 memory, used on Porsche applications.
Available operations:
- Crash Reset
- VIN Programming
- ECU Cloning
The service can be performed via file processing or, when applicable, via complete module service.
Airbag TRW (ZF) – EEPROM 25640 (Iveco)
In stock
Professional service for TRW Airbag control modules equipped with EEPROM 25640, used on Iveco applications and derivative vehicles.
Crash Reset, PROXI Alignment and VIN Programming operations are available, selectable individually or in combination.
Airbag TRW VW22 – MCU Infineon TC224L-16F/TC234L-32F (VAG)
In stock
Professional service for TRW VW22 Airbag ECUs with Infineon TC224L-16F or TC234L-32F MCU, used in VAG group applications.
Available operations:
- Crash Reset
- B2000 error FIX
- ECU Cloning
The service can be performed via file processing or, when applicable, via complete module service.
Airbag Veoneer VW40 – MCU Infineon TC233LP-32F (VAG)
In stock
Professional service for Airbag control modules Veoneer VW40 with MCU Infineon TC233LP-32F, used on VAG group applications.
Available operations:
- Crash Reset
- ECU Cloning
The service can be performed via file processing or, when applicable, via complete module service.
Airbag ZF – MCU Infineon TC234L-32F (FCA)
In stock
Professional file processing and complete service for ZF Airbag / SRS control units equipped with Infineon TC234L-32F MCU, used on numerous FCA applications.
Available operations include Crash Reset, PROXI Alignment, VIN Programming, and B0100:49 / B0102:00 Internal Fault reset.
For file processing, the D-Flash content of the microcontroller must be provided.
The ECU shown in images is not included.
Autoliv Airbag – EEPROM 95320 (FCA)
In stock
Professional file processing and complete service for Autoliv Airbag / SRS control units equipped with EEPROM 95320 memory, used on Fiat Fiorino, Fiat Qubo, Citroën Nemo, and Peugeot Bipper.
Crash Reset, PROXI Alignment, and B0100:49 / B0102:00 error repair operations are available.
For file processing, it is necessary to provide the EEPROM 95320 dump of the control unit.
The ECU shown in the images is not included.
BCM / BCMB Lear – MCU Freescale MC9S12XET256 (JLR)
In stock
Professional service for BCM / BCMB Jaguar Land Rover modules equipped with Freescale MC9S12XET256 (2M53J) MCU.
Emulated EEPROM Recovery and Cloning operations are available.
Emulated EEPROM Recovery can be requested as file processing or as complete module service. Cloning is available exclusively with physical shipment of modules.
BCM Marelli – EEPROM 95320 / MCU NEC V850 (FCA)
In stock
Professional processing of 95320 EEPROM data for Marelli BCMs.
This page is dedicated exclusively to the version with the NEC V850 microcontroller and 95320 EEPROM.
The version with the Fujitsu microcontroller and 95640 EEPROM is handled via a dedicated product.
Multiple operations are available, selectable simultaneously:
- Cloning
- VIN Programming
- White List / Black List key management
- PIN Recovery
The service can be performed directly on files or on modules sent to Tsec Engineering.
The BCM shown in the images is not included.
BCM Marelli – EEPROM 95640 / MCU Fujitsu (FCA)
In stock
Professional processing of EEPROM 95640 data for BCM Marelli.
This page is dedicated exclusively to the version with Fujitsu microcontroller and EEPROM 95640.
The version with NEC microcontroller and EEPROM 95320 is handled through a dedicated product.
Multiple operations are available, selectable simultaneously:
- Cloning
- VIN Programming
- White List / Black List key management
- PIN Recovery
The service can be performed directly on files or on modules sent to Tsec Engineering.
The BCM shown in the images is not included.
Bosch ME7.3.2 ECU – 95160 EEPROM (Ferrari)
In stock
Professional file processing service for Bosch ME7.3.2 engine control units equipped with 95160 EEPROM installed on Ferrari and Maserati vehicles.
ECU Virginization and VIN Programming operations are available, selectable individually or in combination.
The vehicle uses two engine ECUs, one for each bank. For both processes, it is necessary to provide the 95160 EEPROM files for both the right and left ECUs.
Bosch ME7.3/6 ECU – FLASH (HYBRID) 29F400 (Ferrari)
In stock
Professional service for Bosch ME7.3/6 engine control units installed on Ferrari 360 Modena, Spider and Challenge.
Cloning and IMMO OFF operations are available.
The vehicle uses two engine ECUs, one for each bank. Cloning is available exclusively with physical shipment of the four control units involved, while IMMO OFF requires the files of both vehicle ECUs.
Bosch MED17.5.21 ECU – Infineon TC1782 MCU (VAG)
In stock
Professional file processing and complete work service for Bosch MED17.5.21 engine ECUs with Infineon TC1782 MCU, used on numerous VAG group applications.
Immobilizer deactivation, catalytic converter management and speed limiter deactivation services are available. For file processing, it is necessary to provide the ECU P-Flash and D-Flash contents.
The availability of individual works may vary depending on the specific ECU software version.
BOSE Amplifier – Atmel AT32UC3C1512C MCU (Porsche)
In stock
Professional Porsche BOSE amplifier cloning service for units equipped with Atmel AT32UC3C1512C microcontrollers.
The service allows for the transfer of necessary data from the original amplifier to a compatible replacement unit, preserving configuration and vehicle pairing information where technically possible.
Processing is performed exclusively at the Tsec Engineering laboratory and requires the physical shipment of both amplifiers.
Online file processing is not available.
Amplifiers shown in images are not included.
Continental Airbag – EEPROM 25320 (FCA)
In stock
Professional file processing service for Continental Airbag control modules equipped with EEPROM 25320.
PROXI Alignment and Crash Reset operations are available, selectable individually or in combination.
For PROXI alignment, processing can be performed using the dumps of the original and target Airbag ECU or the vehicle’s Body Computer dump together with the target Airbag ECU dump.
FRM3 Lear – MCU Freescale MC9S12XEQ384 (BMW/Mini)
In stock
Professional service for FRM3 Lear modules equipped with Freescale MC9S12XEQ384 MCU.
Emulated EEPROM Recovery and VIN Programming operations are available, selectable individually or in combination.
The service can be requested as file processing or as complete module processing.
LCM Mitsubishi Electric – MCU NEC V850 70F3548 (Porsche)
In stock
Professional Mitsubishi Electric (MEC) LCM module cloning service for managing Porsche LED headlights, equipped with NEC V850 uPD70F3548 microcontroller.
The service allows the necessary data to be transferred from the original module to a compatible replacement unit, preserving, where technically possible, the lighting system configuration information.
Main references: 7PP941572BB, W003T25076.
Cloning is carried out exclusively at the Tsec Engineering lab and requires physical shipment of both modules.
Online file processing is not available.
The ECU shown in the images is not included.
Marelli BCM – EEPROM 95640 / Fujitsu MCU (Iveco)
In stock
Professional processing of EEPROM 95640 data for BCM Marelli.
This page is dedicated exclusively to the version with Fujitsu microcontroller and 95640 EEPROM.
Multiple operations are available, selectable simultaneously:
- Cloning
- VIN Programming
- White List / Black List key management
- PIN Recovery
The service can be performed directly on files or on modules sent to Tsec Engineering.
The BCM shown in the images is not included.
Marelli MJD 9DF ECU – MCU ST SPC5644A / EEPROM 95128 (FCA)
In stock
Professional file processing service and complete operation for Marelli MJD 9DF engine ECU with MCU ST SPC5644A and EEPROM 95128, used on numerous FCA group applications.
Operations are available on immobilizer, emission control systems, Start&Stop, speed limiter and other parameters stored in the control unit, as well as VIN programming, PIN extraction and odometer calibration services.
Depending on the requested operation, it is necessary to provide the Flash memory dump of the microcontroller or the contents of the 95128 EEPROM.
The ECU shown in the images is not included.