Showing 1–24 of 63 results

Airbag Continental – MCU Renesas RH850 R7F7010123/R7F7010183 (Suzuki)

In stock

Professional service for Continental Airbag control units with MCU Renesas RH850 R7F7010123 or R7F7010183, used on Suzuki applications.

Available operations:

  • Crash Reset
  • VIN Programming
  • ECU Cloning

The service can be performed via file processing or, when applicable, via complete module service.

Select options This product has multiple variants. The options may be chosen on the product page

Airbag Continental – MCU ST SPC560P50 (FCA)

In stock

Professional file processing service for Continental Airbag control units equipped with SPC560P50 microcontroller.

PROXI Alignment, Crash Reset and VIN Programming operations are available, selectable individually or in combination.

For PROXI alignment, processing can be performed using the dumps of the original and destination Airbag ECU or the vehicle's Body Computer dump together with the destination Airbag ECU dump.

Select options This product has multiple variants. The options may be chosen on the product page

Airbag FoMoCo (Autoliv) – Infineon XC2361B-40F / XC2336A-72F MCU (Ford)

In stock

Professional file processing and complete bench service for FoMoCo Airbag / RCM units manufactured by Autoliv and equipped with Infineon XC2361B-40F or XC2336A-72F MCUs, used on numerous Ford applications.

Crash Reset and Cloning operations are available. For Crash Reset, you must provide the Flash1 content for XC2361B-40F MCU or Flash3 for XC2336A-72F MCU.

Cloning requires the physical shipment of the unit.

The ECU shown in the images is not included.

Select options This product has multiple variants. The options may be chosen on the product page

Airbag Siemens VDO – EEPROM 95320 (FCA)

In stock

Professional file processing service for Siemens VDO Airbag ECUs equipped with EEPROM 95320.

PROXI Alignment and Crash Reset operations are available, selectable individually or in combination.

For PROXI alignment, processing can be performed using the dumps from the original and target Airbag ECU or the vehicle's Body Computer dump together with the target Airbag ECU dump.

Select options This product has multiple variants. The options may be chosen on the product page

Airbag TRW – EEPROM 95128/95640 (Porsche)

In stock

Professional service for TRW Airbag control modules with EEPROM 95128 or 95640 memory, used on Porsche applications.

Available operations:

  • Crash Reset
  • VIN Programming
  • ECU Cloning

The service can be performed via file processing or, when applicable, via complete module service.

Select options This product has multiple variants. The options may be chosen on the product page

Airbag TRW (ZF) – EEPROM 25640 (Iveco)

In stock

Professional service for TRW Airbag control modules equipped with EEPROM 25640, used on Iveco applications and derivative vehicles.

Crash Reset, PROXI Alignment and VIN Programming operations are available, selectable individually or in combination.

Select options This product has multiple variants. The options may be chosen on the product page

Airbag TRW VW22 – MCU Infineon TC224L-16F/TC234L-32F (VAG)

In stock

Professional service for TRW VW22 Airbag ECUs with Infineon TC224L-16F or TC234L-32F MCU, used in VAG group applications.

Available operations:

  • Crash Reset
  • B2000 error FIX
  • ECU Cloning

The service can be performed via file processing or, where applicable, through full module service.

Select options This product has multiple variants. The options may be chosen on the product page

Airbag Veoneer VW40 – MCU Infineon TC233LP-32F (VAG)

In stock

Professional service for Airbag control modules Veoneer VW40 with MCU Infineon TC233LP-32F, used on VAG group applications.

Available operations:

  • Crash Reset
  • ECU Cloning

The service can be performed via file processing or, when provided, via complete module service.

Select options This product has multiple variants. The options may be chosen on the product page

Airbag ZF – MCU Infineon TC234L-32F (FCA)

In stock

Professional file processing and complete service for ZF Airbag / SRS control units equipped with Infineon TC234L-32F MCU, used on numerous FCA applications.

Available operations include Crash Reset, PROXI Alignment, VIN Programming, and B0100:49 / B0102:00 Internal Fault reset.

For file processing, the D-Flash content of the microcontroller must be provided.

The ECU shown in images is not included.

Select options This product has multiple variants. The options may be chosen on the product page
New

Autoliv Airbag – EEPROM 95320 (FCA)

In stock

Professional file processing and complete service for Autoliv Airbag / SRS control units equipped with EEPROM 95320 memory, used on Fiat Fiorino, Fiat Qubo, Citroën Nemo, and Peugeot Bipper.

Crash Reset, PROXI Alignment, and B0100:49 / B0102:00 error repair operations are available.

For file processing, it is necessary to provide the EEPROM 95320 dump of the control unit.

The ECU shown in the images is not included.

Select options This product has multiple variants. The options may be chosen on the product page

BCM / BCMB Lear – MCU Freescale MC9S12XET256 (JLR)

In stock

Professional service for BCM / BCMB Jaguar Land Rover modules equipped with Freescale MC9S12XET256 (2M53J) MCU.

Emulated EEPROM Recovery and Cloning operations are available.

Emulated EEPROM Recovery can be requested as file processing or as complete module service. Cloning is available exclusively with physical shipment of modules.

Select options This product has multiple variants. The options may be chosen on the product page

BCM Marelli – EEPROM 95320 / MCU NEC V850 (FCA)

In stock

Professional processing of 95320 EEPROM data for Marelli BCMs.

This page is dedicated exclusively to the version with the NEC V850 microcontroller and 95320 EEPROM.
The version with the Fujitsu microcontroller and 95640 EEPROM is handled via a dedicated product.

Multiple operations are available and can be selected simultaneously:

  • Cloning
  • VIN Programming
  • White List / Black List key management
  • PIN Recovery

The service can be performed directly on the files or on modules sent to Tsec Engineering.

The BCM shown in the images is not included.

Select options This product has multiple variants. The options may be chosen on the product page

BCM Marelli – EEPROM 95640 / MCU Fujitsu (FCA)

In stock

Professional processing of EEPROM 95640 data for BCM Marelli.

This page is dedicated exclusively to the version with Fujitsu microcontroller and EEPROM 95640.
The version with NEC microcontroller and EEPROM 95320 is handled through a dedicated product.

Multiple operations are available, selectable simultaneously:

  • Cloning
  • VIN Programming
  • White List / Black List Key Management
  • PIN Recovery

The service can be performed directly on files or on modules sent to Tsec Engineering.

The BCM shown in the images is not included.

Select options This product has multiple variants. The options may be chosen on the product page

Bosch ME7.3.2 ECU – 95160 EEPROM (Ferrari)

In stock

Professional file processing service for Bosch ME7.3.2 engine control units equipped with 95160 EEPROM installed on Ferrari and Maserati vehicles.

ECU Virginization and VIN Programming operations are available, selectable individually or in combination.

The vehicle uses two engine ECUs, one for each bank. For both processes, it is necessary to provide the 95160 EEPROM files for both the right and left ECUs.

Select options This product has multiple variants. The options may be chosen on the product page

Bosch ME7.3/6 ECU – FLASH (HYBRID) 29F400 (Ferrari)

In stock

Professional service for Bosch ME7.3/6 engine control units installed on Ferrari 360 Modena, Spider and Challenge.

Cloning and IMMO OFF operations are available.

The vehicle uses two engine ECUs, one for each bank. Cloning is available exclusively with physical shipment of the four control units involved, while IMMO OFF requires the files of both vehicle ECUs.

Select options This product has multiple variants. The options may be chosen on the product page

Bosch MED17.5.21 ECU – Infineon TC1782 MCU (VAG)

In stock

Professional file processing and complete work service for Bosch MED17.5.21 engine ECUs with Infineon TC1782 MCU, used on numerous VAG group applications.

Immobilizer deactivation, catalytic converter management and speed limiter deactivation services are available. For file processing, it is necessary to provide the ECU P-Flash and D-Flash contents.

The availability of individual works may vary depending on the specific ECU software version.

Select options This product has multiple variants. The options may be chosen on the product page

Continental Airbag – EEPROM 25320 (FCA)

In stock

Professional file processing service for Continental Airbag control modules equipped with EEPROM 25320.

PROXI Alignment and Crash Reset operations are available, selectable individually or in combination.

For PROXI alignment, processing can be performed using the dumps of the original and target Airbag ECU or the vehicle's Body Computer dump together with the target Airbag ECU dump.

Select options This product has multiple variants. The options may be chosen on the product page

FRM3 Lear – MCU Freescale MC9S12XEQ384 (BMW/Mini)

In stock

Professional service for FRM3 Lear modules equipped with Freescale MC9S12XEQ384 MCU.

Emulated EEPROM Recovery and VIN Programming operations are available, selectable individually or in combination.

The service can be requested as file processing or as complete module processing.

Select options This product has multiple variants. The options may be chosen on the product page

Marelli BCM – EEPROM 95640 / Fujitsu MCU (Iveco)

In stock

Professional 95640 EEPROM data processing for Marelli BCMs.

This page is dedicated exclusively to the version with Fujitsu microcontroller and 95640 EEPROM.

Multiple operations are available and can be selected simultaneously:

  • Cloning
  • VIN Programming
  • White List / Black List key management
  • PIN Recovery

The service can be performed directly on the files or on the modules sent to Tsec Engineering.

The BCM shown in the images is not included.

Select options This product has multiple variants. The options may be chosen on the product page

Marelli MJD 9DF ECU – MCU ST SPC5644A / EEPROM 95128 (FCA)

In stock

Professional file processing service and complete operation for Marelli MJD 9DF engine ECU with MCU ST SPC5644A and EEPROM 95128, used on numerous FCA group applications.

Operations are available on immobilizer, emission control systems, Start&Stop, speed limiter and other parameters stored in the control unit, as well as VIN programming, PIN extraction and odometer calibration services.

Depending on the requested operation, it is necessary to provide the Flash memory dump of the microcontroller or the contents of the 95128 EEPROM.

The ECU shown in the images is not included.

Select options This product has multiple variants. The options may be chosen on the product page

NBC Marelli – EEPROM 95160 / MCU NEC V850 (FCA)

In stock

Professional EEPROM 95160 data processing for NBC Marelli.

Multiple operations are available, selectable simultaneously:

  • Cloning
  • VIN Programming
  • White List / Black List key management
  • PIN Recovery

The service can be performed directly on files or on modules sent to Tsec Engineering.

The NBC shown in the images is not included.

Select options This product has multiple variants. The options may be chosen on the product page

NBC Marelli – EEPROM 95320 / MCU NEC V850 (Iveco)

In stock

Professional processing of EEPROM 95320 data for NBC Marelli.

Multiple operations are available, also selectable simultaneously:

  • Cloning
  • VIN Programming
  • White List / Black List key management
  • PIN Recovery

The service can be performed directly on files or on modules sent to Tsec Engineering.

The NBC shown in the images is not included.

Select options This product has multiple variants. The options may be chosen on the product page

TRW (ZF) Airbag – 25640 EEPROM (FCA)

In stock

Professional service for TRW Airbag control units equipped with 25640 EEPROM, used on FCA applications and derived vehicles.

Crash Reset, PROXI Alignment, and VIN Programming operations are available, selectable individually or in combination.

Select options This product has multiple variants. The options may be chosen on the product page

Veoneer SC2 Airbag (RBG) – Infineon TC222S-16F MCU (PSA/Stellantis)

In stock

Professional service for Veoneer SC2 Airbag (RBG) ECUs with Infineon TC222S-16F MCU, used on PSA/Stellantis applications.

Available operations:

  • Crash Reset
  • VIN Programming
  • ECU Cloning

The service can be performed via file processing or, where applicable, through complete module processing.

Select options This product has multiple variants. The options may be chosen on the product page