iMule Emulator / Vehicle Connection Cable
Price range: 3,90 € through 5,90 € VAT ExcI.
Connection cable for iMule Emulator, vehicle side.
Features a 6-pin solder PicoBlade connector and standard 5-wire connections. Available in two lengths: 152.4 mm and 304.8 mm.
| Weight | 0,01 kg |
|---|---|
| Dimensions | 15 × 1 × 1 cm |
| Length | Standard 152.4 mm, Long 304.8 mm |
The iMule Emulator / Vehicle connection cable allows you to connect the iMule Emulator to the vehicle system or the wiring of the application to be emulated.
This cable is used for installing the emulator on the vehicle, according to the wiring diagrams available in the iMule management software.
The cable features a 6-pin solder PicoBlade connector and standard 5-wire wiring.
Available in two lengths:
- Standard – 152.4 mm
- Long – 304.8 mm
The Standard version is suitable for compact installations, while the Long version is useful when a greater connection distance is required.
Main features
- Connection cable for iMule Emulator
- Suitable for vehicle-side connection
- 6-pin PicoBlade connector
- Solder terminals
- Standard 5-wire connections
- Available in two lengths
- Compatible with iMule wiring diagrams
- Suitable for standard installations or those requiring greater wiring distance
Important notes
The product includes only the iMule Emulator / Vehicle connection cable in the selected length.
iMule Emulator and iMule Programmer are not included and are available for purchase separately.
For correct connection, always refer to the diagrams available in the iMule management software.
Only logged in customers who have purchased this product may leave a review.
SHIPPING in 24/48 HOURS
for items in stock
Additional time may be required for special products or dedicated configurations.
Worldwide shipping
Deliveries in Italy and abroad
Protective packaging
Professional preparation of materials
Email tracking
Receive your tracking code immediately
Cost at checkout
Displayed before payment
Related products
BeM LINK – Adapter Support for Bench Testing Blue&Me FCA Units
In stock
BeM LINK is the professional adapter support for powering, diagnosing, and bench testing first and second generation Blue&Me FCA units, including Convergence Marelli and Lauberhorn versions.
It simulates the main electrical system and vehicle accessory connections, allowing you to verify unit operation before reinstallation.
Available with external power supply included or with cable for supplementary power supply.
XGecu Pro T76 universal programmer for EEPROM, Flash, NAND, and eMMC
In stock
XGecu Pro T76 is a USB 3.0 universal programmer for EEPROM, EPROM, NOR Flash, SPI NAND, P-NAND, eMMC, EMCP, microcontrollers, and GAL/CPLD programmable logic devices.
Designed for electronic labs, repairers, and developers, it offers high-speed transfers, programmable voltages, and wide compatibility with serial and parallel devices.
BeMFIX Fix&Go – Complete HFM module repair
In stock
Complete repair service for HFM modules. Includes initial diagnosis, configuration data recovery, NAND memory programming and replacement, bench functional testing, and a 24-month warranty.
The service is reserved for units not previously tampered with. For module installation on a different vehicle, the VIN to be programmed must be provided.
iMule Emulator – CAN + K-Line Emulator for IMMO, ESL, and Airbag
In stock
iMule Emulator is an automotive CAN + K-Line emulator designed for Immobilizer, Steering Column Lock / Electronic Steering Lock, and Airbag Seat Occupancy Sensor applications.
It is programmable, updatable, and can also be installed directly on the OBD port, featuring sleeping mode operation and low stand-by consumption.
iMule Software – Management software for iMule Programmer
In stock
Reviews
There are no reviews yet.