13.5 V DC 1.7 A Power Adapter, 5.5 × 2.5 mm Connector
10,00 € VAT ExcI.
Switching wall-plug power adapter with regulated 13.5 V DC output and maximum current of 1.7 A.
Equipped with a 5.5 × 2.5 mm DC barrel connector, it can be used to power compatible devices with up to 20 W power.
| Weight | 0,05 kg |
|---|---|
| Dimensions | 10 × 5 × 5 cm |
In stock (can be backordered)
13.5 V DC Wall-Plug Power Adapter
The power adapter provides a continuous voltage of 13.5 V DC with a maximum rated current of 1.7 A.
The universal input from 100 to 240 V AC allows use on common electrical networks by connecting it directly to a power outlet.
It is suitable for electronic devices compatible with the specified output voltage, current, connector, and polarity.
DC Barrel Connector
The output cable is equipped with a barrel connector with the following dimensions:
- outer diameter: 5.5 mm;
- inner diameter: 2.5 mm.
Before purchasing, verify that the device to be powered uses the same connector format and correct polarity.
Universal Input
The power adapter accepts an input voltage between 100 and 240 V AC.
This feature allows use with different electrical networks, provided the outlet and plug format are compatible.
Energy Efficiency
Switching technology reduces energy consumption and losses compared to traditional linear power adapters.
Actual efficiency depends on the connected load and operating conditions.
Applications
Can be used with:
- electronic devices powered by 13.5 V DC;
- bench instruments and accessories;
- compatible electronic modules;
- equipment with 5.5 × 2.5 mm DC connector;
- supports and adapters requiring external 13.5 V power supply.
Technical Specifications
| Feature | Value |
|---|---|
| Output voltage | 13.5 V DC |
| Output current | 1.7 A |
| Rated power | 20 W |
| Input voltage | 100–240 V AC |
| Output connector | DC 5.5 × 2.5 mm |
| Installation | Direct to mains outlet |
| Protection rating | IP20 |
| Voltage regulation | Not available |
| Overvoltage protection | Not present |
| Overcurrent protection | Not present |
| Short-circuit protection | Not present |
Dimensions
| Dimension | Value |
| Width | 80 mm |
| Height | 42 mm |
| Depth | 28 mm |
Compatibility Verification
Before connecting the power adapter, verify:
- voltage required by the device;
- maximum current required;
- connector dimensions;
- connector polarity;
- power consumption;
- plug compatibility with the electrical outlet.
Incorrect voltage, polarity, or connector may damage the connected device.
Important Information
The product is intended exclusively for equipment compatible with 13.5 V DC power supply.
The IP20 protection rating does not allow use in environments exposed to water, high humidity, conductive dust, or atmospheric agents.
The power adapter does not have declared protections against overvoltage, overcurrent, or short circuit. Use exclusively with compatible devices and under controlled operating conditions.
Only logged in customers who have purchased this product may leave a review.
SHIPPING in 24/48 HOURS
for items in stock
Additional time may be required for special products or dedicated configurations.
Worldwide shipping
Deliveries in Italy and abroad
Protective packaging
Professional preparation of materials
Email tracking
Receive your tracking code immediately
Cost at checkout
Displayed before payment
Related products
MINIWARE MHP30 Mini Hot Plate – Portable Preheating Station with 65 W PD Power Supply
In stock
The MINIWARE MHP30 Mini Hot Plate is a smart, portable preheating station with a 30 × 30 mm heating area and adjustable temperature from 100 °C to 350 °C.
Featuring an OLED display, a replaceable heating plate and USB-C Power Delivery, it reaches 300 °C in approximately 150 seconds using the included 65 W PD power supply.
BeMFIX Fix&Go – Complete HFM module repair
In stock
Complete repair service for HFM modules. Includes initial diagnosis, configuration data recovery, NAND memory programming and replacement, bench functional testing, and a 24-month warranty.
The service is reserved for units not previously tampered with. For module installation on a different vehicle, the VIN to be programmed must be provided.
iMule Emulator – CAN + K-Line Emulator for IMMO, ESL, and Airbag
In stock
iMule Emulator is an automotive CAN + K-Line emulator designed for Immobilizer, Steering Column Lock / Electronic Steering Lock, and Airbag Seat Occupancy Sensor applications.
It is programmable, updatable, and can also be installed directly on the OBD port, featuring sleeping mode operation and low stand-by consumption.
iMule Pack Plus – Starter Kit with Emulators, Programmer and Software
In stock
Professional iMule starter kit consisting of iMule Emulator, iMule Programmer and free management software.
Available in configurations with 2, 3, 5 or 10 emulators, it is ideal for automotive laboratories working on Immobilizer, ESL / electronic steering lock and Airbag Seat Occupancy Sensor applications.
Reviews
There are no reviews yet.