XGecu Pro T76 universal programmer for EEPROM, Flash, NAND, and eMMC

High-performance universal programmer

XGecu Pro T76 is a professional universal programmer designed for reading, writing, verifying, and testing a wide range of memories and integrated circuits.

The new architecture, based on a 32-bit RISC-V microcontroller and FPGA, together with the USB 3.0 Type-C interface, allows for significantly higher transfer speeds compared to previous generation programmers.

It is suitable for electronics repair labs, automotive, IT, hardware development, data recovery, and electronic component programming.

Supported devices

XGecu Pro T76 supports numerous device families, including:

• Serial EEPROMs of the 24, 25, 35, 45, 85, 93, and 95 series;
• Parallel EPROMs, EEPROMs, and Flash of the 26, 27, 28, 29, 37, 39, 49, and 50 series;
• NOR Flash memories;
• P-NAND Flash memories;
• SPI NAND memories;
• SD NAND and compatible SD cards;
• eMMC and EMCP memories;
• Microcontrollers supported by XGecu software;
• GAL and CPLD programmable logic devices;
• VGA devices and VGA ISP programming;
• SRAM memories;
• Logic circuits of the 54, 74F, 74LS, 74HC, and CMOS 4000 families.

Actual compatibility depends on the device model, package, and adapter used.

High read and write speed

The USB 3.0 Type-C interface and the new internal architecture enable high operating speeds:

Actual performance may vary based on the device, configuration, and adapter used.

Programmable voltages

The T76 allows for precise adjustment of the main operating voltages:

VCC, VPP, and I/O signal voltages are adjustable across 64 levels.

Integrated protections

The programmer integrates several protection systems to reduce the risk of damage to the device and the programmer:

• overvoltage protection;
• overcurrent protection;
• reverse polarity protection;
• insufficient voltage signaling;
• programmable VCC current limiting;
• VPP line protection.

76-pin architecture

XGecu Pro T76 features 76 external lines:

• 48 multi-function I/O pins;
• 28 dedicated I/O pins.

The configuration allows for handling complex devices and packages with a high number of connections, in many cases reducing the number of different adapters required.

USB powered

The programmer is normally powered directly via the USB connection and does not require an external power supply for common programming operations.

For some specific applications or configurations, it may be necessary to check the instructions provided by the XGecu software and documentation.

Package contents

The package includes:

Any additional adapters, sockets, or accessories must be verified based on the selected commercial configuration.

Software, manual, and device list

Download the software, manual, and any available documents from the Attachments section of the product page.

Before purchasing, we recommend verifying the compatibility of the component to be programmed by consulting the official list of supported devices:

XGecu T76 application list:
http://www.xgecu.com/MiniPro/T76_List.txt

The list is updated with new software versions and may vary over time.

Note on compatibility

The presence of a memory family among those supported does not automatically guarantee compatibility with every single part number.

Before purchasing, it is necessary to verify:

• complete device part number;
• manufacturer;
• package;
• supply voltage;
• required adapter;
• availability of the component in the XGecu software.

Summary technical specifications

The main features and stated performance are taken from the manufacturer’s data sheet.