Airbag Veoneer VW40 – MCU Infineon TC233LP-32F (VAG)

AIRBAG VEONEER VW40 – MCU INFINEON TC233LP-32F

Professional data processing and service for Airbag control modules Veoneer VW40 used on VAG group applications and based on MCU Infineon TC233LP-32F.

The service allows Crash Reset and ECU Cloning operations, depending on the selected service mode.

AVAILABLE OPERATIONS

Crash Reset

Allows removal of crash event data from the Airbag control module, restoring the content necessary for module reuse.

For file processing, the following is required:

• D-Flash of the MCU Infineon TC233LP-32F

The operation is available both via file processing and via complete module service.

ECU Cloning

Allows transfer of the necessary data from the original control module to the destination control module.

Cloning is performed exclusively via complete module service.

The following must be sent:

• Original Airbag control module
• Destination Airbag control module

To ensure correct compatibility, both control modules must have the same part numbers.

SERVICE MODALITIES

File processing

The customer independently reads the control module and sends us the required file.

For the Crash Reset operation, the D-Flash of the MCU Infineon TC233LP-32F must be provided.

Once processing is complete, the modified file ready to be written to the control module will be returned.

This mode is available for:

• Crash Reset

Complete module service

The customer physically sends the Airbag control module to Tsec Engineering.

The laboratory handles reading, processing and programming of the module directly.

This mode is available for:

• Crash Reset
• ECU Cloning

For cloning, both the original control module and the destination control module must be sent.

REQUIRED DATA

Depending on the selected operation:

• Crash Reset: D-Flash
• Cloning: original control module + destination control module with the same part numbers

FILE PROCESSING PROCEDURE

After purchasing the service:

• Read the D-Flash of the MCU Infineon TC233LP-32F
• Send the file following the instructions received with the order
• Wait for the processed file to be returned
• Write the modified file to the control module

Correct reading and writing of the module remain the customer’s responsibility when the File processing mode is selected.

MODULE SHIPPING

In the case of complete service, the control module must be shipped to Tsec Engineering at the customer’s expense and responsibility.

For cloning, both modules must be shipped, clearly identifying:

• Original control module
• Destination control module

The shipping costs selected during checkout refer exclusively to the return shipping of the serviced material.

IMPORTANT INFORMATION

Before purchasing the service, verify that the control module corresponds to a supported Veoneer VW40 version with MCU Infineon TC233LP-32F.

For cloning, a destination control module with the same part numbers as the original control module must be used.

In case of doubts about module identification or compatibility, contact us before placing the order.