BCM Marelli – EEPROM 95640 / MCU Fujitsu (FCA)

BCM Marelli 95640 – Fujitsu

Professional service dedicated to Marelli Body Computers equipped with Fujitsu microcontroller and EEPROM 95640.

Available Operations

Several operations are available, selectable individually or in combination: cloning, VIN programming, key management and PIN recovery.

Cloning

Transfer of necessary data from the original BCM to the destination BCM.

• File processing: EEPROM dumps from both the original BCM and the destination BCM are required.
• Complete service: both modules must be sent, clearly identified as original and destination.

The destination BCM must be technically compatible with the original unit.

VIN Programming

Programming or modification of the VIN chassis number stored in the BCM data.

The EEPROM dump or BCM module must be provided and the new VIN to be programmed must be specified.

Key Management

Processing of key information stored in the BCM, including those in the White List / Black List.

PIN Recovery

Recovery of the PIN code from the data contained in the EEPROM 95640 memory.

Service Modes

File processing

The customer independently reads the EEPROM 95640 and sends the dump to Tsec Engineering.

The service includes:

• verification of the received file conformity;
• execution of the selected operations;
• return of the processed file or requested information.

This mode is completely digital and does not require physical shipment of the BCM.

Complete Module Service

The customer physically sends the BCM to Tsec Engineering. The laboratory will handle the entire process:

• module identification;
• memory reading;
• data verification and processing;
• programming;
• final check.

For cloning, both the original BCM and the destination BCM must be sent.

Shipping

Shipping of modules to Tsec Engineering must be arranged and paid for by the customer.

Shipping costs calculated at checkout refer exclusively to the return of the processed material.

Required Data

Depending on the selected operations, the following may be required:

• EEPROM 95640 dump;
• original BCM;
• destination BCM;
• new VIN;
• information regarding the keys to be managed;
• any additional information requested by technical support.

Important Information

The product includes exclusively the services selected during purchase.

The BCM shown in the images is for illustrative purposes and is not included in the product.

Incomplete, corrupted or incorrectly acquired dumps may require a new reading.

For complete services, any hardware damage or previous tampering may require additional checks before the operation.

In case of doubt about compatibility, contact technical support before purchase, providing the Part Number and attaching a legible photograph of the BCM label.